Mountain Beaded Vinyl Liner Replacement Standard Gauge
Our premium liners are protected from pool chemicals and the sun's damaging U.V. rays. Our liners will last longer and maintain their beautiful appearance for years.
If your pool does not have a flat bottom or the wall is higher than 54 inches you will need an Expandable Overlap Liners and this type of beaded liner is not for your pool!
Beaded Above Ground Pool Liners
Beaded Liners are made with a special bead at the top of the liner which snaps into a channel (Bead Receiver) at the top of the pool wall. This liner can be used to replace other beaded liners without additional equipment. This liner can replace an overlap or a hung liner with the addition of a bead receiver kit. This liner must also be purchased specifically for 48, 52 or 54 inch wall heights.
J-Hook or J-Bead or U-Bead Liner
This type is also typical type of liner for an above ground pool. The liner at the top portion of the wall of a liner has a hardened upside down "J" looking curved piece that is designed to hang on the top of the pool wall. This is similar to a beaded liner with pattern styles but not as easy as a beaded liner installation as it requires the top rails of the pool to be removed to install as a beaded liner would not necessarily need this step. This type gives you the wide variety of wall patterns found with beaded and is usually a bit cheaper on AG pools because it does not require bead recievers to be installed. This type is an easy and cheaper conversion from an overlap pool liner.
Multi-Bead or Unibead Vinyl Pool Liners
Newest type of beaded liner. As manufacturing processes getting better and cheaper, .this was the next step for liner manufacturers. They make the top part of the wall portion of the liner with a beaded and just above that put an upside down J-Hook. You can install this just like a J-Hook/U-Bead liner, or you can Pinch the sides of the J-Hook part of the liner and it easily can be pushed and snapped into an industry standard bead received. The Multi-Bead provides all the benefits of protective liner and the freedom to use patterns found only on beaded liners.
Mountain Beaded Pool Liner Features
- Bead Types: Kayak or Standard Bead, Multi-Bead (same as Uni-Bead), Wilkes bead (same as J-Hook, Small Bead or Esther Williams
- Constructed of full industry standard gauge virgin vinyl
- Strong, double-welded seams
- Will fit either a 48" or 52" or 54" pool side wall.
- Made to Order: No Cancellations, No Returns, No Refunds.
- Backed by a 10-Year Pro-Rated Warranty
Last Updated: 09/12/2024 02:55 PM - ID:6516