Newport Vinyl Beaded Pool Liners 25 gauge

Above Ground Beaded Swimming Pool Liners

Newport Beaded Vinyl Liner Replacement

Our premium liners are protected from pool chemicals and the sun's damaging U.V. rays.  Our liners will last longer and maintain their beautiful appearance for years.

Beaded Above Ground Pool Liners

are made with a special bead at the top of the liner which snaps into a channel (Bead Receiver) at the top of the pool wall. This liner can be used to replace other beaded liners without additional equipment.  This liner can replace an overlap or a hung liner with the addition of a bead receiver kit.  This liner must also be purchased specifically for 48, 52 or 54 inch wall heights.

• J-Hook or J-Bead or U-Bead Liner

  This type is also typical type of liner for an above ground pool. The liner at the top portion of the wall of a liner has a hardened upside down "J" looking curved piece that is designed to hang on the top of the pool wall. This is similar to a beaded liner with pattern styles but not as easy as a beaded liner installation as it requires the top rails of the pool to be removed to install as a beaded liner would not necessarily need this step. This type gives you the wide variety of wall patterns found with beaded and is usually a bit cheaper on AG pools because it does not require bead recievers to be installed. This type is an easy conversion from an overlap pool liner.

• Multi-Bead or Unibead Vinyl Pool Liners

  Newest type of liner. As manufacturing processes getting better and cheaper, .this was the next step for liner manufacturers. They make the top part of the wall portion of the liner with a beaded and just above that put an upside down J-Hook. You can install this just like a J-Hook/U-Bead liner, or you can Pinch the sides of the J-Hook part of the liner and it easily can be pushed and snapped into an industry standard bead received. The Multi-Bead provides all the benefits of protective liner and the freedom to use patterns found only on beaded liners.

Features

• Constructed of full 25-gauge virgin vinyl
• Strong, double-welded seams
• Backed by a 10-Year Limited Warranty  
• Will fit either a 48" or 52" or 54" high pool wall.

Newport Vinyl Heavy Gauge has been discontinued.